Heating
For heating, it can be controlled using the controller attached to the wall inside the room.
[Heating temperature control]
- Switch to heating mode with the “(외출)” button and then adjust the temperature with the up and down buttons
- If the boiler controller is turned off as shown in the picture above, Press the “외출” button for about 3 seconds to start the boiler.
Hot Wate
- When in [Heating] mode, press the [온도] button once to change to [Hot Water] mode.
Tip) If you set the temperature to 60 degrees when first setting the hot water, you can use hot water faster.
Hot water is automatically supplied 24 hours a day, but it may take 2 to 3 minutes. If it does not work after 5 minutes, please contact customer service.
Air Conditioning
- In the case of cooling, you can set it to cooling mode using the remote control in the room and then adjust it.
If the air conditioner works even after turning off the power, check whether [자동건조] is displayed on the remote control screen.
If not in use, please press the [설정/해제] button.