Air conditioning

1) Living room wall pad - Top right "Apps" - Cooling mode

2) Select living room, room 1, room 2
3) Individual temperature can be controlled with the small pad at the bottom (air conditioner remote control can also be used)

* Each room and living room can be controlled using the living room wall pad/air conditioner remote control.
* It has cooling/automatic/dehumidifying/blowing functions and can be adjusted with the remote control mode button.
* There is no hot air mode.

Heating

1) Living room wall pad - Top right "Apps" - Heating mode

2) Select living room, room 1, room 2
3 ) Individual temperature control possible with small pad at the bottom

※ However, be careful because when the bottom panel of the wall pad is in hot water mode, it will not become warm even if you increase the heating temperature.
※ How to switch to hot water mode > heating mode: You can switch by pressing and holding the ‘heating mode’ button for more than 3 seconds.

*There is no separate air conditioner warm air function, only floor heating can be controlled using the temperature controller in each room and the living room wall pad.

Hot water

You can use hot water by turning the faucet head to the left without any separate wall pad manipulation.
※ The Busan Station branch has many high-rise rooms, so it may take some time for hot water to come out.

Q. There is no hot water.
A. Unplug the cord connected to the communication device under the kitchen sink, wait 5 seconds, and then reconnect. If the same problem persists, please check the error code on the living room wall pad and report it to customer service.